Do you know how the drive shaft operates properly?

The drive shaft is a very good mechanical product, and its development in our automobile and industry is very rapid. Its use has brought us a lot of help, and it has also provided a lot for the lives of our residents. Convenient, the transmission shaft manufacturer teaches you how to operate it reasonably? Next, the transmission shaft manufacturer will give us a detailed explanation.

The drive shaft is not allowed to exceed the allowable transmission torque of the drive shaft during use. Misfits are not allowed. In driving, if it comes out, it will cause changes. Choose the appropriate one, the whole vehicle accident drive shaft or the customized special drive shaft, otherwise it will cause the whole vehicle to vibrate and affect the normal service life of the drive shaft. Tighten the bolts firmly. Then install the hanger bolts, but do not tighten them. Tighten the hanger bolts while rotating the drive shaft by hand before and after the connection. Pay attention to the adjustment when it exceeds the loading requirements; make sure that the drive shaft is not affected by radial action as much as possible. It is strictly forbidden to change the instantaneous excessive transmission speed ratio, which will cause the instantaneous bearing torque of the transmission shaft to exceed the rated torque and be damaged. Whether the connecting bolts are loose, whether the bridge support bearings, sliding spline pairs, and universal joints have sufficient butter; add sufficient and qualified butter to each lubricating part of the drive shaft; replace and maintain it in time, and the drive shaft only needs to be replaced with a zero. Re-check the dynamic balance of the components, otherwise the entire drive shaft will be scrapped, or even a vehicle accident.

Today's content is introduced here by our drive shaft manufacturers. If you have any questions about our products, you can pay attention to our website. We will update new news content at any time. You can also call our staff to learn more about it.
OEM 3910041B05 JAKKO AUTO PARTS OUTER C.V. JOINT FOR NISSAN