Do you understand how auto parts last for a long time?

Update time:2023-01-28

If you want auto parts to have a long service life, you need to pay attention to the following:

avoid heat

Engine piston temperature is too high, which can easily lead to overheating and melting, resulting in cylinder clinging; rubber seals, triangular tapes, tires, etc. are overheated, and are prone to premature aging, performance degradation, and shortened service life; electrical equipment such as starters, generators, and regulators If the coil is overheated, it is easy to burn out and be scrapped.

Avoid reaction

The engine cylinder head gasket cannot be installed upside down, otherwise it will cause premature ablation and damage to the cylinder head gasket; The chevron points to the rear.

avoid dirty

If parts such as fuel filter, oil filter, air filter, hydraulic oil filter and various filter screens are too dirty, the filtering effect will deteriorate. Dirty parts such as water tank cooling fins, air-cooled engine block and cylinder head cooling fins, and cooler cooling fins will cause poor heat dissipation and excessive temperature.

Avoid

The engine valve lock pieces should be installed in pairs. If they are missing or missing, the valves will be out of control and the pistons will be damaged; the cotter pins, locking screws, safety plates or If the anti-loosening devices such as spring pads are missing, serious failures may occur during use; if the oil nozzle used to lubricate the gears in the timing gear chamber of the engine is missing, it will cause serious oil leakage there.

avoid washing

For the paper air filter element of the engine, do not use any oil to clean it; for leather parts, it is not suitable to use oil to clean it.

Avoid oil

If the paper filter element of the dry air filter of the engine is stained with oil, it is easy to suck the mixed gas with a high concentration into the cylinder, resulting in insufficient air volume, increased fuel consumption, and reduced engine power; if the triangular tape is stained with oil, It will accelerate its corrosion and aging; brake shoes, dry clutch friction plates, brake bands, etc. are stained with oil, which will threaten driving safety. Tire rubber is very sensitive to oil corrosion, and contact with oil will soften or peel the rubber.

avoid pressure

If the tire casing is stored in a stack for a long time and is not turned over in time, it will be deformed due to extrusion; if the paper filter element of the air filter and fuel filter is squeezed, it cannot reliably filter; Rubber oil seals, triangular tapes, oil pipes, etc. cannot be squeezed.

avoid repetition

Some parts should be used once, but individual drivers or repairmen reuse them for saving or because they don't understand the "taboo", which can easily lead to accidents.

avoid fire

Rubber products such as tires, triangular tapes, cylinder liner water blocking rings, rubber oil seals, etc., will be easily deteriorated or damaged if they are close to the fire source, and on the other hand, they may cause fire accidents.